HUNTER-PRO 32 User Manual LED Keypads
10
Entering the User or Short codes will
arm the system immediately!
OR
Enabled User Code
Arming the system to HOME Mode
Arming “HOME 1”:
Short Code or User Code or Enabled User Code
Arming “HOME 2”:
Short Code or User Code or Enabled User Code
Fast Arming (without code)
For quickly arming the system (possible only if enabled by installer):
Full Arming:
Arming HOME 1:
Arming HOME 2:
NOTE:
Exit Delay in HOME 1 and HOME 2 can be disabled by the installer.
Entering the User Menu
From this point forward, every time
Master Code
is mentioned in operation
and/or programming, the explanation is the same for
Enabled User Code
and
for
User Code or Installer Code
that accesses the User Menu by long press (
)
of the
key before entering the code.
All these will access the User Menu. On RXN-9, the middle green LED and the
left red LED turn ON. On RXN-416, the green Arm and the red Fault LEDs turn
ON. The system awaits user selection.
Disarming the System
Disarming the system with User Code
User Code
