Safety
Operating Manual PSENvip RL D P Set
1001641-EN-09
| 15
WARNING!
Crushing and trapping of fingers or hands!
There may be additional hazard areas in zones that are not monitored by
the PSENvip.
In these zones there is an increased risk of crushing and trapping of fingers
or hands.
Secure these zones with appropriate additional measures!
– Carry out a hazard analysis!
– Raise the switchover point, which initiates braking at low speed. It
must be placed even higher than the position used for tools of tool
class 2. The switchover point must be monitored by the safety sys-
tem.
– Each press stroke must be acknowledged by the operator prior to ini-
tiation.
Please also note the following guidelines in danger zones in areas that cannot be detected
and monitored by the safeguard.
Example: Upper tool with a danger zone outside the zone monitored by the PSENvip
Fig.: Danger zone in unmonitored zone
