Installation and wiring
Operating Manual PSEN op4B/1 Series
1003356-EN-02
44
PIN Designation
Description
Cable colour
5
n.c.
-
Grey
}
n.c. = not connected
6.5.3
TEST/START button
Connect the N/C contact on the TEST/START button to the supply voltage on the safety
light grid.
6.5.4
EDM
Connect the N/C contact on the EDM to the supply voltage on the safety light grid.
6.5.5
Earthing the safety light grid
Attach the earth connection in the drill hole provided on the connector side of the safety
light curtain using the screw provided (see diagram).
Identify the earthing contact using the adhesive label provided.
[1]
Legend
:
[1]: Drill holes for earthing screw. The drill holes are on the bottom of the safety light grid, at
the same height on the right
and left.