Pilz 777750, Operating Manual

Page: 15 / 23

PNOZ X10.11P
Operating Manual PNOZ X10.11P
20820-EN-13
| 15
Technical details
General 777750 787750
Certifications
CCC, CE, EAC (Eurasian), TÜV,
cULus Listed CCC, CE, EAC (Eurasian), TÜV,
cULus Listed
Electrical data 777750 787750
Supply voltage
Voltage 24 V 24 V
Kind DC DC
Voltage tolerance -15 %/+10 % -15 %/+10 %
Output of external power supply
(DC)
5,5 W 5,5 W
Residual ripple DC 160 % 160 %
Duty cycle 100 % 100 %
Inputs 777750 787750
Number 2 2
Voltage at
Input circuit DC 24 V 24 V
Start circuit DC 24 V 24 V
Feedback loop DC 24 V 24 V
Current at
Input circuit DC 50 mA 50 mA
Start circuit DC 100 mA 100 mA
Feedback loop DC 100 mA 100 mA
Min. input resistance at power-on 89 Ohm 89 Ohm
Max. overall cable resistance Rl-
max
Single-channel at UB DC 45 Ohm 45 Ohm
Dual-channel without detection
of shorts across contacts at UB
DC
90 Ohm 90 Ohm
Dual-channel with detection of
shorts across contacts at UB DC
15 Ohm 15 Ohm
Relay outputs 777750 787750
Number of output contacts
Safety contacts (N/O), instant-
aneous
6 6
Auxiliary contacts (N/C) 4 4
Max. short circuit current IK 1 kA 1 kA
Utilisation category
In accordance with the standard EN 60947-4-1 EN 60947-4-1