Pilous ARG 250 plus S.A.F., Instruction Manual

Page: 6 / 47

This horizontal bandsaws are used for cutting different kinds of materials. Hydraulic unit enables vice workpiece clamping, arm down
feed into cut, band starting, band stop, arm uplift after cut to set height and vice opening. This complete automatic cycle can be
carried out by pressing only one starting button when the saw is in the automatic mode. The arm feed into cut is powered by the
hydraulic damper pressure which makes the cutting process more efficient and band saw more productive specially when cutting full
materials. All functions may be controlled separately when the saw is in manual mode. Material feed into saw is manual. The vice
pressure regulation on the ARG machines is as a standard machine equipment. An endless welded metallic band serves as the
cutting tool. The band is tensioned mechanically by a tensioning running wheel. The running wheel is driven by a driving wheel driven
via worm gearbox by a two-stage motor (version S.A.) / one-stage motor (version S.A.F.). The saw band in the machining zone is
precisely guided in the band guide heads. Outside machining zone a protection by band covers is provided. S.A.F. models are
equipped with more powerful engines with frequency invertor which enables smooth speed regulation in the range of 15 - 90 m/min.
Optimal cutting speed setting increases the band lifetime, machine productivity and cut accuracy.
2. Machine data
I base
J coolant and pump tray
K control panel
L vice hand wheel
M worktable lever
N moving jaw
O moving bar lock lever
P end switch
Q fixed bar with
band guidance
R moving bar with
band guidance
S angle scale
T uplift limit switch
U hydraul. Vice cylinder
A hydraulic unit
B band
C band tensioning wheel
D gear box
E engine
F oil damper
G vice
H revolving worktable
ARG 250 plus S.A.F.
ARG 300 plus S.A.F.
ARG 330 Plus S.A.F.
ARG 250 S.A.F.
ARG 300 S.A.F.
ARG 330 S.A.F.
C O B Q F E N
I L K
R
M H A J P T
S C O B Q F D E N
I L K M H A J
R S
P T
P D P P P G G
U U