PIKO 37526 Instruction Manual Download Page 5

Page: 5 / 16

Getting Started: Initial Operation
Unpacking the Model

Remove the styrofoam packaging
extremely carefully to prevent
damaging accessories and attached
parts such as handrails etc.

Initial Operation

We recommend letting the locomotive
run without a train for 30 minutes
in both directions, to properly break
it in. This will help achieve optimal
performance and longevity for the
locomotive. Of course, your model
should only be run on smooth and
perfectly clean tracks with reliable
electrical contact to all track sections.

Technical Data
Power Supply

The model should only be operated
on a pure, filtered DC power supply
of 0 to 24 volts, with a capacity of at
least 2 Amp and a fast-acting fuse or
circuit breaker to protect against short
circuits. Do not use a power supply
which is not in safe and perfect
working condition. (See “Digital
Decoder” section for operation on
digital power.)

Mechanism

The locomotive has a powerful high-
precision motor, which turns the
wheels through a robust gearbox.

Lighting

The model is equipped with automatic
directional headlights, using white
LEDs for a realistic appearance.
The “front” lights are illuminated
according to the travel direction.

Radius

The locomotive can run on a track with
a minimum recommended radius of
600 mm (23.62‘’).

Digital Decoder

The model locomotive is prepared for
“plug and play” installation of a PIKO
#36125 Decoder (available separately).
As soon as the decoder is properly
installed, the locomotive can be
operated on digital as well as Analog
DC-powered layouts.

Sound Module

Only the model of the V 60 is prepared
for “plug and play” installation of a PIKO
#36195 Sound Unit (available separately).
This reproduces authentic sounds of the
real V 60. It requires that the loco be
equipped with a PIKO #36125 decoder.
The sound unit must be connected to the
decoder via the included interface cable.
The sound unit includes a high-quality
extended frequency range speaker with
a waterproof diaphragm for outdoor
operation.

Note: The sound unit is

operable only on digital layouts, not
on analog DC-powered layouts.

Maintenance
Lubrication

After each 25 hours of operation, and
after any long periods of storage, please
lubricate the locomotive‘s gears with a
sparing amount of plastic-compatible,
non-hardening grease. Remove the
gearbox bottom cover and be careful to
keep the front and rear wheelsets aligned
with each other. Be sure to securely
re-tighten the gearbox bottom cover
screws.

Cleaning

If cleaning is necessary, use only a mild
cleaning agent (such as soap and water)
and gentle action with a soft non-
abrasive cloth or brush. Never immerse
the loco in liquid or “flood” any internal
parts!

Wheel Wipers and pick-Up shoes should
be changed after 500 hours of operation.

Please Note! Damage to Carpets
and Other Surfaces: Normal
operation of the locomotive causes
wear of mechanical parts (wheels,
electrical pickups etc.). This produces
carbonized dust, grease and oil,
which can permanently stain carpets,
wood floors and other materials. It
is the user’s responsibility to take
proper precautions against this
damage. Wipe any grease or oil from
the track rails with a clean soft cloth.
PIKO Spielwaren GmbH, as well as
its representatives, distributors and
retailers, assume no liability for any
such damage.