DEINSTALLING PICTURETEL LIVE
E-2
4. Delete these files:
C:\WINDOWS\PCS100.INI
C:\WINDOWS\VCSWIN.INI
C:\WINDOWS\*.PCS
5. Remove the PictureTel Live changes from the SYSTEM.INI file.
Use an editor to remove the changes from SYSTEM.INI,
following these steps:
a. In the
[BOOT]
section,
change
the line
COMM.DRV=C:\PCS\TDCOMM.DRV
by replacing
C:\PCS\TDCOMM.DRV
with the original driver
name. You will find this name in the
[PICTEL01]
section, on
the line that begins
StdCommDriver=
.
For example, if you find this line in the
[PICTEL01]
section
StdCommDriver=COMM.DRV
then change the line in the
[BOOT]
section to
COMM.DRV=COMM.DRV
Or, if you find this line in the
[PICTEL01]
section
StdCommDriver=JANCOMM.DRV
then change the line in the
[BOOT]
section to
COMM.DRV=JANCOMM.DRV
b. In the
[386ENH]
section,
remove
the line
DEVICE=C:\PCS\PICTEL00.386
and similar lines, where 00 may be replaced with 01, 02, and
so on.
c. In the
[386ENH]
section,
remove
the EMM EXCLUDE
statement that corresponds to the PictureTel Live memory
address range:
EMMExclude
d. Entirely
remove
the section
[PICTEL00]
and similar sections, where 00 may be replaced with 01, 02,
and so on.