What You Need to Provide
D-5
Siemens EWSD NI-1 Switch Settings
Information Category
Specific Options
Line Code
Digital Subscriber Line (DSL)
2B1Q
National*
Provisioning Parameters
BCHDNs = 2 (directory numbers assigned by telephone company)
BCDN = C56
BCDN = C64 (if supported by interexchange carrier to local central office)
CT = CMD (circuit mode data)
TSPIDs assigned by telephone company: Two
BRI should be provisioned as follows:
Subscriber
- Set B1 CT = CMD (for circuit switched data/voice)
- Set B2 CT = CMD (for circuit switched data)
- BCHCT = 2
- IBCHCT = 2
- OBCHCT = 2
- COS = NICND (class of service; no ISDN calling # delivery)
- PIC = XXX-C56 (where XXX is the interexchange carrier’s code)
- PIC = XXX-C64 (where XXX is the interexchange carrier’s code)
Terminal Service Profile Data:
- USID = 1 (user ID)
- TSPID = 7085551234001 (for illustration purposes)
- TERMLIM = 1 (maximum number of terminals that can share this SPID)
- CT = CMD
- FKMPINUM = 0 (feature key management profile index number)
Access Data:
- BCHEQN = 2 (number of B-channels assigned)
- BEQN = SP & AU3 & C56 & C64 (bearer capabilities on BRI)
- COE = CLASS1 (class of equipment)
- LINKOPT = DYNNOPL (dynamic link, no packet links)
- CPDDN = 7085551234-CMD - The directory numbers assigned bt the telephone
company must match the bearer capabilities requested. In this example, the single
number listed is for circuit mode data. For this application, two DN’s are requested.
- CPVDN2 = 7085551235
* NI-1 was first supported in the APS 11 software release.
NOTE:
Some fields might vary from one switch to another. Voice DN might be different from CMD DN.