INSTALLING NETWORK INTERFACE BOARDS
C-16
DDM RS-449 Kit
The V.35/RS-449 Network Interface boards use 3CC0 (hexadecimal)
as the default I/O port address, which is set using a DIP switch. For
more information, refer to
Changing the I/O Port Address on the DDM/
Network Interface Board
(below).
Caution
Before you install the Network Interface board, you should
check and configure the environment on your ISA-bus or
EISA-bus PC. Refer to
Appendix A, Checking Your PC Settings
for instructions on these procedures.
Unpacking the DDM/Network Interface Board
To unpack the DDM/Network Interface board, remove the board
from its protective box and then from the plastic antistatic package.
Component
Quantity
Part
Number
DDM/Network Interface board
1
Live50 CHI to MVIP cable
1
180-0293-01
Live100 MVIP cable
1
510-0167-01
RS-449/RS-366 4-leg cable
1
180-0312-01
DDM/Network Interface board
installation diskettes
2
PictureTel Live50/Live100 Network
Interface Installation Guide
1
800-0610-02
