PictureTel Concorde 4500, Administrator'S Manual

Page: 3 / 250

Note: In this document, the term “monitor” is used to refer to the NTSC or PAL television (TV) broadcast
receiver that is part of the Concorde•4500 system. These receivers are governed by different regulations
than computer monitors.
Bescheinigung Des Herstellers/Importeurs
Hiermit wird bescheinigt, daß das Concorde•4500 in Übereinstimmung mit den Bestimmungen
der Vfg 1046/1984 funkenstört ist.
Der Deutschen Bundespost wurde das Inverkehrbringen dieses Geräts angezeigt und die Berechtigung zur
Überprüfung der Serie auf Einhaltung der Bestimmungen eingeräumt. Dieses Gerät wurde sowohl einzeln
als auch in einer Anlage, die dem normalen Anwendungsfall entspricht, auf die Einhaltung der
Funkentstörbestimmungen geprüft. Es ist jedoch möglich, daß die Funkentstörbestimmungen unter
ungünstigen Umständen bei anderen Gerätekombinationen nicht eingehalten werden. Für die Einhaltung
der Funkentstörbestimmungen der gesamten Anlage, in der dieses Gerät betrieben wird, ist der Betreiber
verantwortlich.
Notice to Users of Public DATAPHONE® Digital Service
The following instructions are provided to ensure that you comply with FCC Rules, Part 68.
1. All direct connections to DDS lines must be made through standard plugs and jacks furnished by the
telephone company. No connections can be made to party lines or coin lines. Before connecting your
unit, you must do the following:
a. Tell your local telephone company that you have an FCC registered device and that you wish to
connect to the company’s line. Provide them with the 14-digit FCC registration number listed on the
device’s label. They will also need to know the facility interface code and service code to connect
the necessary service. For your unit, the facility interface code is 04DU5-56 for 56 kbps service.
The service code is 6.0Y.
b. Inform the local telephone company of the jack arrangement you want to use, which is RJ-48S.
c. Connect the channel service unit (CSU) with the appropriate cable after the telephone company
has installed the requested jack.
2. If the unit appears to be malfunctioning, it should be disconnected from the telephone line until you learn
if your equipment or the telephone line is the source of the trouble. If your equipment needs repair, it
should not be reconnected until it is repaired.
3. The CSU is designed to prevent harm to the DDS network. If the telephone company finds that the
equipment exceeds tolerance parameters, the telephone company can temporarily disconnect service,
although they will attempt to give you advance notice if possible.
4. Under FCC Rules, no customer is authorized to repair this equipment. This restriction applies
regardless of whether the equipment is in or out of warranty.