PictureTel Concorde 4500, Administrator'S Manual

Page: 222 / 250

SYSTEM MESSAGES
C-10
Line error
The Concorde¥4500 system
detects errors in the incoming
data, indicating a possible
network problem. 1. Check that the numbers dialed
are correct.
2. Try redialing the call.
3. Check the cabling between the
Concorde•4500 and the
network.
4. Ask the far-end operator to
check the far-end cabling
between the
videoconferencing system and
the network.
5. Try calling another site to
isolate the problem.
Local channel
loopback
You are running a local channel
loopback test. (No action is required.)
Locally initiated
remote loopback
You are running a remote
loopback test. (No action is required.)
Mute: Far end
The far end has pressed
MUTE
. (No action is required.)
Mute: Near end
The near end has pressed
MUTE.
(No action is required.)
Mute: Near and Far
Ends The near end and the far end have
both pressed
MUTE.
(No action is required.)
Negotiating The near end has connected to the
far end and the systems are
negotiating for an agreeable mode
of operation. (No action is required.)
Network Connected
The near end has connected to the
far end on a network level, and the
systems are trying to achieve
frame alignment. (No action is required.)
Table C-1: Concorde•4500 System Messages (Continued)
If you see. . . It means. . . Do this. . .