Picomed PicoPhone, Documentation

Page: 6 / 22

PicoPhone loudspeaking analog telephone Page 6.
Internal microphone will automatically be disconnected when an external microphone is
connected.
3 User manual
PicoPhone can operate in different modes. These are:
Ordinary use.
Programming – plain. Programming made only by use of an IR-remote controller. This
mode shall be used to save telephone numbers in the telephone book.
Programming – advanced. Gives access to advanced settings only. Ment to be used by
technicians when installing the device.
Programming – IR-training. Let the device teach IR-signals from foreign IR-remote
controllers. Make it possible to control it with other IR-remote controllers.
In chapter 3.4.11 an overview of the main functions are given on one page. The page is ment
as a quick guide for the user.
3.1 Incoming call
PicoPhone gives a ringing signal to indicate an incoming call. You may hook off by the use of
the remote controller, key on device, external switch or by the help of the automatic
answering function if this is enabled. When the automatic answering function activates, there
will be given a warning-tune, and then the PicoPhone hooks off after a predefined number of
ringing signals (the number can be changed in advanced programming mode).
3.2 Outgoing call
By the help of a remote controller or external switches it is possible to make a phone call.
PicoPhone will wait for the dialling tone before the telephone number are transmitted. If the
dialling tone not is possible to detect for the device, the number will be transmitted after a
predefined time. All numbers will be transmitted as DTMF.
PicoPhone can be programmed with a fixed prefix (i.e ”0”) to be used in combination with a
telephone switch board. If a prefix is enabled, the device will wait for dialling tone after the
prefix number is transmitted. When the telephone book is used, the device will transmit the
prefix automatically.
3.3 Telephone conversation
The telephone line will be active until:
The user disconnects (”hook on”) with the remote controller, key on PicoPhone, or an
external switch.
The person you are talking to, hooks on.
If the conversation is started by the automatic answering function, it will be ended when
the predefined conversation time (programmable in advanced programming mode)
expires. In this case it will be given 4 warning tones before disconnection.