Picomed PicoPhone, Documentation

Page: 16 / 22

PicoPhone loudspeaking analog telephone Page 16.
Step 2 is a continuation of step 1, and if executed, all recorded speech will be deleted
(words in auditive feedback and voice messages).
Do as following:
1.
Press and hold the key for automatically answering function. Light indicator for function
will change as normal.
2. Press hided key once.
3. Press 3 times on telephone key.
4. Press 3 times on hided key.
5. Release the key for automatically answering function. Light indicator for function will
start triple flashing. You will hear ” Beep-Beep-Beep" as a confirmation for a correct
entered mode.
6. To start recycling: press the key for automatically answering function and restoring
process starts. If the key not is released at once, but pressed for 3 seconds, also step 2
(delete all recorded speech) will be executed. The speech deleting process lasts for 5
seconds. A long ”Beep” will sound when the process are finished.
Maximum time for the points 1-5 is 8 seconds. Maximum time between the points 5-6 is 8
seconds.
When restoring the values, the following are done:
Alle telephone numbers in the telephone book will be deleted.
Redial memory will be deleted.
Volume level will be set to value = 3.
Automatic answering function disabled.
Alle values which can be altered in advanced programming mode will be set to default.
Trained IR will be deleted.
5 Maintenance
Picomeds PicoPhone loudspeaking IR-controlled loudspeaking analog telephone is developed
to work without any sceduled maintenance. The equipment should be cleaned when
neccessary. Wipe the equipment with a slightly damp cloth or an antistatic cloth. Never use a
dry cloth, while this result in risk of static charges. It shall not be exposed for fluids in any
way.
6 Trouble shooting
If your equipment does not behave as expected, first of all try to solve the problem yourself
using the following table.
Symptom Possible cause Reccomended action
Completely dead. No light
indicators illuminated.
No power connected. Ensure that the power
supply is the correct one
which was delivered with
the equipment.
Ensure that the power
supply is connected to a
functioning wall outlet.
Ensure that the power
supply is properly
connected to the