-9-
5.3 Installation of purified water faucet
※
Notices regarding selecting the location
Caution: If there are obstacles in the open area under a sink, it is not possible to install
a faucet. Be sure to check the lower part of the sink in order to install a faucet.
1. Drill the positioning hole (diameter 3~5mm) using a drill.
(Fig. 5-1)
Fig. 5-1. Positioning hole drilling
2. Install the drill on a drill chuck firmly and drill a large hole (diameter 11~12mm) (Fig. 5-2)
Fig. 5-2. Big hole drilling
Caution: Use a strong speed drill for this work
Caution: Avoid a fast RPM during first drill
operation. There may be dangerous
as chips or pieces can be scattered.
Operate slowly by pressing the drill motor on
The positioning hole lightly.
Increase the motor RPM gradually.
3. Clean the chips around the hole.
You are now ready to install a faucet.
4. Insert the base washer into the screw area
under the faucet body and then insert the
faucet in the drilled hole.
5. Insert the rubber packing washer under a sink
and then fix the faucet firmly using fixing nuts
firmly.
6. Connect one touch fitting to the end of the
screw area of the faucet and connect the hose.
Fig. 5-3. Faucet installation
Summary of Contents for PnP Plug&Play
Page 1: ... 1 USER MANUAL ...
