Picogram PnP Plug&Play, User Manual

Page: 12 / 14

-12-
6. How to Replace the Filter
6.1 Filter replacement (4 types are all same.)
<How to remove the filter>
1. Lock the raw water supply valve.
2. Unlock the faucet to discharge the pressure inside the system.
Caution : If the pressure inside the system is not discharged, water could be splashed
with a "POP!" sound when removing the filter.
3. To replace the filter easily, hold the filter and pull it 45
°
forward.
4. For the Turn type filter, remove the filter by turning it to CCW.
For the Push type filter, remove the filter by turning it in the status of pressing the push
button. (Pull the filter by turning to remove easily.)
Fig. 8-1. Turn type filter removal Fig. 8-2. Push type filter removal
<How to install the filter>
5. Remove the packing of the new filter and match the upper part of the filter with the hole of
the lower part of the connector and then insert it by turning. (Refer to Fig.7-1 and 7-2 of
page 9.)
6. When the replacement process has been completed, unlock the feed water supply valve.
7. Check if there is a leakage in the filter and the head connector assay assembly part.
8. The purified water should be running out continuously. Wait for at least 5 minutes and then
lock the faucet.
6.2 System Maintenance
Caution: To get the clean purified water, be sure to sick to the filter replacement period.
Sediment filter: 6~8 months Pre carbon filter: 6~8 months
UF Membrane filter: 12~18 months Post carbon filter: 12 months
Remove the filter by
turning it to CCW to
remove it easily.
Turn the filter to CCW
by pressing the push
button to remove
it easily