Picogram PnP Plug&Play, User Manual

Page: 7 / 14

-7-
5. How to install the product
Caution
▩
Keep to the minimum distance so that the hose connected between components
is not bent or twisted.
▩
Do not install in any place that is lit by direct sunlight or exposed
in the frozen status.
▩
Be sure to install in a convenient place for filter exchange or maintenance.
▩
When moving or lifting the product, make sure the filter remails vertical.
5.1 How to connect the hose between components
The connection of the hot/cold water supply line, head connector assay, and the purified
water faucet can be completed simply just by using one touch fitting.
※
How to use one touch fitting
Fitting is the structure where the part called 'collette' is inserted in the body as shown
in the figure below. The inside of the collette is shaped like a fishing hook that helps
the hose to stay inside to be removed if inserted.
1. Push the hose in the part assembled with collette deeply and connect (Figure 3-1, 3-2).
2. When removing the hose, pull the hose by pressing the collette as shown in Figure 3-3.
Fig. 3-1: Insert the hose into Fig. 3-2: Push the hose into the Fig. 3-3: When removing the hose,
the collette. bottom of the fitting. complete the task by pressing
the collette.
Fig. 3. How to use one touch fitting
Collette
body