EMS-LTE User Manual
Synchronous device time:
This is to setup the EMS-LTE time for daily report or other timers. After
click Write the RTU Time, the EMS-LTE will be synchronous the same time as the PC.
Device ID:
Non-necessary. This is mainly for monitoring center to identify the EMS-LTE; If
communicate via Modbus protocol, device ID only can be 1~247.
Device description:
This is the description of the EMS-LTE, e.g.: installation address, usage
instructions and so on.
Add Timestamp to Alarm SMS:
Tick it stands for while alarm occurrence, the Alarm SMS will include
the EMS-LTE current time information at the SMS Content.
Arm automatically when Power On:
Tick it stands for once the
EMS-LTE
powered up, the
EMS-LTE
will
enter into Arm Mode automatically.
Auto Arm after Disarmed:
Fill the timeout to enter into Armed Mode automatically after disarmed
operation. This is useful for security protection applications.
Tips:
Arm:
Under this mode, any alarm occurrence will send SMS and dial the authorized numbers immediately. And execute the
programmed I/O outputs.
Disarmed
: Under this mode, alarm occurrence will not send SMS & dial the authorized numbers.
Timer Reporting SMS Content Settings:
Tick the related items to add its value/status to the Timer report
SMS contents.
Alarm SMS Content Settings:
Ticks the related items to add its value/status to the Alarm SMS Contents.
Alarm Number Settings
This is to setup the Authorized User Telephone Numbers to receive the Alarm SMS or dial. Tick it
stands for while the related event alarm occurrence will send SMS to this number.
Reminder:
Please remember that click "Save" -" Save Settings" button to save it after parameter be written, below pages are
the same.
Power On:
Tick it stands for while the EMS-LTE powered up, will automatically send SMS to this
Summary of Contents for EMS-LTE
Page 10: ...EMS LTE User Manual 7 Wiring ...
