EMS-LTE User Manual
Low Alarm SMS Content:
When threshold low alarm happen, will send "channel name + this content" to
authorize number.
Recovery SMS Content:
When alarm recovery, send SMS "channel name + this content" to authorize
number.
Enable Recovery SMS:
Tick it, then can send SMS to authorize number when recovery.
Relay X:
X=0~3, unnormal value will alarm-link relative relay.
Enable:
Tick it stand for enable alarm function.
Reminder:
1.
If need SMS Alarm function, pls tick Slave Alarm function for authorize number in Number Settings page.
2.
When 16 Bit used for extend AIN inputs, can't convert acquisition ADC value to actual one according to range. For
example: When Mxxx remote I/O module extend AIN, since Mxxx AIN register value is ADC, then device EMS-LTE read
value is also ADC value. But DAM122 AIN value is calculated to actual value according to range, then stored in register, so
the value device read, is also calculated value.
When add slave, function code choose 16, then write value page as below:
Summary of Contents for EMS-LTE
Page 10: ...EMS LTE User Manual 7 Wiring ...
