PIAGGIO NRG POWER PUREJET, Workshop Manual, Page: 38 / 248

2 . Turn on the headlight and check that the bor-
derline of the projected light beam on the screen
is not lower than 9/10 of the distance from the
ground to the centre of vehicle headlamp and high-
er than 7/10;
3 . Otherwise, regulate the headlight by adjusting
the screw « A », after removing the front grille.
N.B.
THE ABOVE PROCEDURE COMPLIES WITH
THE EUROPEAN STANDARDS REGARDING
MAXIMUM AND MINIMUM HEIGHT OF LIGHT
BEAMS. REFER TO THE STATUTORY REGU-
LATIONS IN FORCE IN EVERY COUNTRY
WHERE THE vehicle IS USED.
Maintenance
NRG Power Purejet
MAIN - 10