PIAGGIO NRG POWER PUREJET, Workshop Manual, Page: 185 / 248

Removal
•
Remove the pin split ring located at the
back of the calliper body.
•
Remove the pin, paying attention in re-
covering the spring, hence remove the
pads.
•
The pads must be replaced if the work-
ing thickness is less than 1.5 mm
Refitting
- To reassemble perform the above steps in re-
verse order. Position the leaf spring with the arrow
facing up.
Fill
NRG Power Purejet
Braking system
BRAK SYS - 5