![PI Q-521 User Manual Download Page 45](http://html.mh-extra.com/html/pi/q-521/q-521_user-manual_1554423045.webp)
6 Startup and Operation
Q-521 Miniature Linear Stage
MP145E
Version: 1.0.1
41
You have read and understood the manual of the PC software.
The electronics and the required PC software have been installed. All connections on
the electronics have been set up (see user manual of the electronics).
Starting up the Q-521.x3x with controller
1.
Start up the linear stage (see user manual of the controller).
The startup comprises the following steps:
−
Selecting the stage type
−
Defining the reference point of the axis
−
Commanding of first motion for testing
2.
If necessary: Adapt the operating frequency in step mode or the velocity (see user
manual of the electronics) to your application (also refer to "General Notes on Startup
and Operation" (p. 37) and "Operating Time" (p. 53)).
In the user manual of the controller, the startup is described using the PIMikroMove
program.
Starting up the Q-521.x0x with E-872 drive electronics
1.
Start up the linear stage (see user manual of the drive electronics).
The startup comprises the following steps:
−
Selecting the stage type
−
Commanding of first motion for testing
2.
If necessary: Adapt the operating frequency in step mode (ID 0x1F000400) to your
application (also refer to "General Notes on Startup and Operation" (p. 37) and
"Operating Time" (p. 53)).
In the user manual of the drive electronics, the startup is described using the
PIMikroMove program.