6.6
Connecting the V-408
Tools and Accessories
■
Optional:
■
C-815.00SA0302-0300 extension cable for motor signals, HD D-sub 26-pole (m/f), 3 m
■
C-815.00SA4041-0300 extension cable for sensor signals, D-sub 15-pole (m/f), 3 m
■
4 space bolts, included with
V408B9900 mounting hardware (p. 9)
Requirements
✓
You have read and understood the
general safety instructions (p. 8)
✓
You have read and understood the user manual for the electronics used.
✓
You have installed the electronics properly.
✓
The electronics are switched off.
NOTICE
Damage due to incorrect connection of the V-408!
Connecting unsuitable electronics or a wrong cable can damage the V-408 or the electronics.
►
Make sure that the electronics support the drive type of the V-408 and are configured
accordingly.
►
Use cables from PI miCos only to connect the V-408 to the electronics.
►
Pay attention to correct
Connecting the V-408
1. Optional: Use extension cable.
a) Fix the space bolts onto the extension cable's connectors.
b) Connect the extension cable for the motor signals to the V-408's HD D-sub 26-pole
connector and the corresponding socket on the electronics.
c) Connect the extension cable for the sensor signals to the V-408's D-sub 15-pole socket
and the corresponding connector on the electronics.
2. Connect the motor cable's HD D-sub 26-pole connector to the corresponding socket on
the electronics.
3. Connect the sensor cable's D-sub 15-pole socket to the corresponding connector on the
electronics.
4. Secure the connectors against unintentional removal.
6 INSTALLATION
V408M0001EN
‒
2/17/2020
23
M O T I O N | P O S I T I O N I N G
