3. Tighten the screw with a torque of 1.2 Nm to 1.5 Nm.
4. Make sure that the contact resistance is <0.1
Ω
at 25 A at all connection points relevant for
attaching the protective earth conductor.
6.4
Building a Multi-Axis System
The V-408.132020 can be used in XY systems. If a V-408.232020 is used as upper positioner,
an adapter is necessary, see
"Optional Accessories" (p. 12)
.
Designations in these instructions:
■
Lower positioner: Forms the basis of the multi-axis system, is attached to an underlying
surface
■
Upper positioner: Forms the upper axis of the multi-axis system, is attached to the lower
positioner rotated by 90°
Overview
Figure 6: Example of a V-408.132020 on a V-408.232020
1. 4 M2.5×10 screws
2. Upper positioner
3. Lower positioner
Black arrows: Holes for aligning, Ø 3 mm H7, depth 3.5 mm
6 INSTALLATION
V408M0001EN
‒
2/17/2020
18
M O T I O N | P O S I T I O N I N G
