● enableDINint(addr, bit, edge) - enable interrupts for an input change on the specified bit. The "edge" is
a string value that is 'r' for rising, 'f' for falling, of 'b' for both.
● disableDINint(addr,bit) - disable interrupts on the specified bit
Special Modes
The DAQC2plate can be operated in 4 specific modes:
1. Legacy (all of the functions described in the sections above)
2. Motor Controller
3. Function Generator
4. Oscilloscope
Installing the Applications
Applications with graphical user interfaces have been developed for each of these modes. To install them,
open a terminal window inside your home directory and perform the following steps:
1. If you haven't already done so:
sudo pip install Pi-Plates
2. If you haven't already done so:
sudo pip3 install Pi-Plates
3. Install the Python-QT routines:
sudo apt-get install python3-pyqt4
4. Download the apps and the documentation:
sudo wget
https://pi-plates.com/downloads/DAQC2apps.tar.gz
5. Expand the archive:
tar -xzvf DAQC2apps.tar.gz
6. After the files have been unpacked, delete the archive with:
rm DAQC2apps.tar.gz
We know that's a lot of steps and we soon hope to have a script that will automate it with a pip command. But,
when when you're done, you should have a nice set of shortcuts on the left side of your screen: