phyCORE-TriCore Development Board
6
shows the factory default jumper settings for operation of
the phyCORE-TriCORE Development Board with the standard
phyCORE-TC1796 (use of two RS-232 interfaces, the Boot button etc.
on the Development Board). Jumper settings for other functional
configurations of the phyCORE-TC1796 module mounted on the
Development Board are described in
section 1.3
©
PHYTEC Meßtechnik GmbH 2009 L-730e_0
9
Figure 6:
Default Jumper Settings of the phyCORE-TriCORE Development
Board for Standard phyCORE-TC1796
