phyCORE-ADuC812
26
© PHYTEC Meßtechnik GmbH 2002 L-462e_2
2.4.1
"Blinky"
The “Blinky” example downloads a program to the Flash that, when
executed, manipulates the LED D3 on the phyCORE Development
Board LD 5V that is located above the jumper field (refer to
Figure 3).
•
Returning to the FlashTools98 tabsheet, choose the Bank Utilities
tab, highlight Bank #1 within the Bank Erase section, and click on
the Erase Bank(s) button to erase this memory bank.
•
Wait until the status check in the lower left corner of the
FlashTools98 tabsheet finishes, returning the connection
properties description to the lower left corner of the window.
•
Next choose the File Download tab and click on the File Open
button.
The hexfile has already been installed to your hard drive during the
installation procedure.
•
Browse to the correct drive and path for the phyCORE-ADuC812
Demo folder (default location
C:\PHYBasic\pC-ADuC812\Demos\Keil\Blinky\Blinky.hex)
and click Open.
•
Click on the Download button. You can watch the status of the
download of the Blinky.hex into external Flash memory in the
Download window.
