7 Maintenance
H-850 Hexapod Microrobot
MS202E
Version: 2.3.0
47
5.
Put the foam cover onto the hexapod, see figure. Pay attention to the appropriate
orientation of the cover.
6.
If a folded corrugated cardboard cushion is part of the original packaging: Place the
cushion onto the foam cover, see figure.
7.
Close the inner box.
8.
Put a 740 x 740 x 130 mm foam cushion onto the inner box, see figure.
9.
Put the cover onto the outer box, see figure.
10.
Secure the outer box on the pallet with two parallel strapping bands.
11.
Wrap the box and pallet with stretch film to protect them against moisture, see figure.
Step 3 a
Step 3 b
Step 3 e
The appropriate orientation of
the foam insert depends on the
hexapod model.
Step 5
The appropriate orientation of
the foam cover depends on the
hexapod model.
