2. Hardware installation
2.1 Connect network and power
4
Connect the camera to your internet router or switch using the network cable.
Using the included power adaptor, plug one end into the Power Connector and
plug the other end into a power outlet. Once connected and powered, the status
indicator LED should illuminate a constant green.
Please note that for initial setup, you need to connect the camera directly to your
router or switch with a network cable. You cannot connect wirelessly to the
camera without first setting it up via a network cable.
NOTICE
Network cable
Router
DC power adaptor
The Cube HD camera is not intended for outdoor use. It may only be installed
indoors.
IMPORTANT!
You can set up the wireless via the App or web browser quickly.
Instructions for wireless setup are included later, within this guide.
