Photron FASTCAM ultima 1024, User Manual

Page: 79 / 90

6-5 6-5
END mode END mode
The Processor treats memory as a circular buffer when using the END mode. Pictures are stored in The Processor treats memory as a circular buffer when using the END mode. Pictures are stored in
sequence with the current picture replacing the oldest picture in memory until you press the TRIGGER sequence with the current picture replacing the oldest picture in memory until you press the TRIGGER
button again or a trigger signal is received through TRIGGER IN or TRIGGER SW IN on the rear panel button again or a trigger signal is received through TRIGGER IN or TRIGGER SW IN on the rear panel
of the Processor. This approach to recording gives you an infinite amount of record time while you wait of the Processor. This approach to recording gives you an infinite amount of record time while you wait
for something to happen. After the recording is stopped you will have the last 512 frames of action for something to happen. After the recording is stopped you will have the last 512 frames of action
stored in memory. stored in memory.
The END mode is used when the experiment has an observable end and you are interested in the action The END mode is used when the experiment has an observable end and you are interested in the action
immediately before the recording was stopped. immediately before the recording was stopped.
Removed Removed Oldest frame Oldest frame
Newest Frame Newest Frame
Only frames viewed during playback Only frames viewed during playback
Stop Stop
Empty Empty
Full
Full
Removed
Removed
Newest Frame Newest Frame
Oldest frame Oldest frame