Photron FASTCAM ultima 1024, User Manual

Page: 46 / 90

7. LIVE Mode 7. LIVE Mode
When the processor receives a code, it switches LIVE on or off. The processor then sends back a code When the processor receives a code, it switches LIVE on or off. The processor then sends back a code
that shows the new setting (status) or a special code. that shows the new setting (status) or a special code.
The response commands are as follows. The kind of command varies by the status (the first digit The response commands are as follows. The kind of command varies by the status (the first digit
shows the number given in Response Command Code Table). shows the number given in Response Command Code Table).
When switched to on: When switched to on:
1. Frame rate: Code of current status 1. Frame rate: Code of current status
2. Resolution (horizontal): Current status code 2. Resolution (horizontal): Current status code
3. Resolution (vertical): Current status code 3. Resolution (vertical): Current status code
4. Shutter speed: Current status code 4. Shutter speed: Current status code
6. Playback control: Code of P/S off 6. Playback control: Code of P/S off
6. Playback control: Code of STOP 6. Playback control: Code of STOP
8. Display mode: Code of TRIG.PT off 8. Display mode: Code of TRIG.PT off
8. Display mode: Code of BOCK off 8. Display mode: Code of BOCK off
9. LIVE mode: Code of LIVE on 9. LIVE mode: Code of LIVE on
12. Photron Remote Control Keypad code (30h) 12. Photron Remote Control Keypad code (30h)
N o t e : N o t e :
For resolution and shutter speed, the code that is selected by [Resolution and Shutter For resolution and shutter speed, the code that is selected by [Resolution and Shutter
Speed Selection] is sent back. Speed Selection] is sent back.
When switched to off: When switched to off:
9. LIVE mode: Code of LIVE off 9. LIVE mode: Code of LIVE off
10. Recording operation: Code of READY off 10. Recording operation: Code of READY off
N o t e : N o t e :
If the setting of frame rate, resolution, shutter speed or recording mode, when LIVE is If the setting of frame rate, resolution, shutter speed or recording mode, when LIVE is
on, is different from what each of them is set when LIVE is off, the kind of response on, is different from what each of them is set when LIVE is off, the kind of response
code will be different. code will be different.
The response commands are as follows: The response commands are as follows:
1. Frame rate: Code fo current status 1. Frame rate: Code fo current status
2. Resolution (horizontal): Code of current status 2. Resolution (horizontal): Code of current status
3. Resolution (vertical): Code of current status 3. Resolution (vertical): Code of current status
4. Shutter speed : Code of current status 4. Shutter speed : Code of current status
9. LIVE mode: Code of LIVE off 9. LIVE mode: Code of LIVE off
10. Recording operation: Code of READY off 10. Recording operation: Code of READY off
10. Recording operation: Code of current status 10. Recording operation: Code of current status
12. Photron Remote Control Keypad (30h) 12. Photron Remote Control Keypad (30h)
N o t e : N o t e :
For resolution and shutte speed, the code that is selected by [Resolution and Shutter For resolution and shutte speed, the code that is selected by [Resolution and Shutter
Speed Selection] will be sent back. Speed Selection] will be sent back.
3-22 3-22
RS422 Protocol and Commands RS422 Protocol and Commands