Photron FASTCAM ultima 1024, User Manual

Page: 45 / 90

The response codes are as follows. The kind of response command varies by the status (the first digit shows The response codes are as follows. The kind of response command varies by the status (the first digit shows
the number given in Responce Command Code Table): the number given in Responce Command Code Table):
When in FR, REV, PLAY, FF, or P/S mode: When in FR, REV, PLAY, FF, or P/S mode:
6. Playback control: Code after the change 6. Playback control: Code after the change
8. Display mode: Code of TRIG.PT off 8. Display mode: Code of TRIG.PT off
When in STOP mode: When in STOP mode:
6. Playback control: Code of STOP 6. Playback control: Code of STOP
6. Playback control: Code of P/S off 6. Playback control: Code of P/S off
8. Display mode: Code of BLOCK off 8. Display mode: Code of BLOCK off
8. Display mode: Code of TRIG.PT off 8. Display mode: Code of TRIG.PT off
5. Playback Frame Rate 5. Playback Frame Rate
When a code is sent to the processor, the processor sends back a code that shows the new setting (status). When a code is sent to the processor, the processor sends back a code that shows the new setting (status).
The response commands are as follows (the first digit shows the number given in Response Command The response commands are as follows (the first digit shows the number given in Response Command
Code Table): Code Table):
7. Playback frame rate: Code after the change 7. Playback frame rate: Code after the change
6. Display Mode 6. Display Mode
When a code is sent to the processor, a code that shows the new setting (status) is sent back from the When a code is sent to the processor, a code that shows the new setting (status) is sent back from the
processor. processor.
The response command codes are as follows. The kind of response command varies by the status. (the The response command codes are as follows. The kind of response command varies by the status. (the
first digit shows the number given in Response Command Code Table) first digit shows the number given in Response Command Code Table)
When BLOCK is selected(BLOCK playback is switched on or off) When BLOCK is selected(BLOCK playback is switched on or off)
8. Display mode: Code after BLOCK on/off switched 8. Display mode: Code after BLOCK on/off switched
When START or END is selected (marks the start or end frame of a block playback) When START or END is selected (marks the start or end frame of a block playback)
No response command No response command
When REPORT is selected (REPORT is switched on or off) When REPORT is selected (REPORT is switched on or off)
When set to on: When set to on:
8. Display mode: Code of REPORT on 8. Display mode: Code of REPORT on
When set to off: When set to off:
1. Frame rate: Current status code 1. Frame rate: Current status code
2. Resolution (horizontal): Current status code 2. Resolution (horizontal): Current status code
3. Resolution (vertical): Current status code 3. Resolution (vertical): Current status code
4. Shutter speed: Current status code 4. Shutter speed: Current status code
8. Display mode: Code of REPORT off 8. Display mode: Code of REPORT off
12. Photron Remote Keypad code (30h) 12. Photron Remote Keypad code (30h)
N o t e : N o t e :
For resolution and shutter speed, the code that is selected by [Resolution and Shutter Speed Selection] For resolution and shutter speed, the code that is selected by [Resolution and Shutter Speed Selection]
is sent back. is sent back.
When TRIG.PT is selected: (Image of trigger frame is displayed) When TRIG.PT is selected: (Image of trigger frame is displayed)
6. Playback control: Code of P/S on 6. Playback control: Code of P/S on
8. Display mode: Code of TRIG.PT on 8. Display mode: Code of TRIG.PT on
When ID is selected(ID number is incremented) When ID is selected(ID number is incremented)
No response command No response command
3-21 3-21
RS422 Protocol and Commands RS422 Protocol and Commands