Photron FASTCAM ultima 1024, User Manual

Page: 66 / 90

4-4 4-4
Turning the System on Turning the System on
SWIT SWITCH ON CH ON THE PR THE PROCESSOR OCESSOR
Press the power switch on the front panel to turn the system on. As soon as power is on, the system Press the power switch on the front panel to turn the system on. As soon as power is on, the system
is automatically set up as follows (factory setting): is automatically set up as follows (factory setting):
1. Live: ON 1. Live: ON
2. REC RATE: 500 2. REC RATE: 500
3. REC MODE: START 3. REC MODE: START
4. ID No.: 01 4. ID No.: 01
5. REPORT: ON 5. REPORT: ON
6. Playback rate: 30FPS 6. Playback rate: 30FPS
The video monitor screen looks as follows: The video monitor screen looks as follows:
N o t e : N o t e :
When settings of framing rate, mode, etc. from the previous session are When settings of framing rate, mode, etc. from the previous session are retained in memory at the time retained in memory at the time
of shut down, the system will start up, of shut down, the system will start up, when it is switched on again, with those settings preserved when it is switched on again, with those settings preserved
effective. effective.
01 LIVE 10:10:00
START 1024 × 1024 500FPS PHOTRON
ID number Display mode time
Trigger mode Resolution Frame rate