Photron FASTCAM ultima 1024, User Manual

Page: 64 / 90

4-2 4-2
Connecting the processor Connecting the processor
C a u t i o n : C a u t i o n :
Please unplug the processor power cord from the mains outlet before connecting FASTCAM-ultima Please unplug the processor power cord from the mains outlet before connecting FASTCAM-ultima
1024 system components to the processor. See the schematics on page 4-3. 1024 system components to the processor. See the schematics on page 4-3.
Connect between the camera and the processor with the camera cable. Connect between the camera and the processor with the camera cable.
Connect the remote control keypad cable to the remote control connector on the rear panel. Connect the remote control keypad cable to the remote control connector on the rear panel.
Connect the video output on the processor rear panel to the video input connector of the VCR with a Connect the video output on the processor rear panel to the video input connector of the VCR with a
75-ohm coaxial cable. 75-ohm coaxial cable.
Connect the video output connector on the back of the VCR to the input connector on the rear panel Connect the video output connector on the back of the VCR to the input connector on the rear panel
of the video monitor with a coaxial cable. of the video monitor with a coaxial cable.
To use a VGA monitor, connect the VGA output connector on the rear panel of the processor to the To use a VGA monitor, connect the VGA output connector on the rear panel of the processor to the
VGA monitor. VGA monitor.
Note: Please always use an SXGA monitor to view the high-resolution VGA image output from the Note: Please always use an SXGA monitor to view the high-resolution VGA image output from the
FASTCAM-ultima 1024. FASTCAM-ultima 1024.
CONNECTING THE AC POWER CORD CONNECTING THE AC POWER CORD
First make sure the power switch on the processor rear panel is in the OFF position, then connect the First make sure the power switch on the processor rear panel is in the OFF position, then connect the
power cord to the receptacle on the processor rear panel. power cord to the receptacle on the processor rear panel.
C a u t i o n : C a u t i o n :
Make sure the voltage from the power outlet agrees with the voltage requirement of the system. Make sure the voltage from the power outlet agrees with the voltage requirement of the system.
System Connection System Connection