Photron FASTCAM ultima 1024, User Manual

Page: 54 / 90

system rev system rev
Displays the system revision on the monitor screen. Setting procedures and response codes are as Displays the system revision on the monitor screen. Setting procedures and response codes are as
follows: follows:
Procedure 1 Procedure 1 Transmission code: Transmission code: 9. Menu mode: Code of on/off 9. Menu mode: Code of on/off
Response codes: Response codes: 11. Menu mode: Code of MENU on 11. Menu mode: Code of MENU on
12. Photron Remote Control Keypad code (18h) 12. Photron Remote Control Keypad code (18h)
13. Menu selection items: Code of random frame 13. Menu selection items: Code of random frame
Procedure 2 Procedure 2 Transmission code: Transmission code: 9. Menu mode: 9. Menu mode:
↑ ↑
or or
↓ ↓
code to select system rev code to select system rev
(see the chart for the number of codes needed) (see the chart for the number of codes needed)
Response codes: Response codes: 12. Photron Remote Control Keypad code (18h) 12. Photron Remote Control Keypad code (18h)
13. Menu selection items: Code after change 13. Menu selection items: Code after change
Procedure 3 Procedure 3 Transmission code: Transmission code: 9. Menu mode: Code of “decision” 9. Menu mode: Code of “decision”
Response codes: Response codes: 12. Photron Remote Control Keypad code (0Ah) 12. Photron Remote Control Keypad code (0Ah)
19. system rev: Code of monitor display 19. system rev: Code of monitor display
8. Display mode: Code of REPORT on 8. Display mode: Code of REPORT on
Note: The code of “REPORT on” is returned only when “REPORT off” Note: The code of “REPORT on” is returned only when “REPORT off”
At this point, the revision number of the system is displayed on the monitor. At this point, the revision number of the system is displayed on the monitor.
Procedure 4 Procedure 4 Transmission code: Transmission code: 9. Menu mode: Code of “decision” 9. Menu mode: Code of “decision”
Response codes: Response codes: 1. Frame rate: Current status code 1. Frame rate: Current status code
2. Resolution (horizontal): Current status code 2. Resolution (horizontal): Current status code
3. Resolution (vertical): Current status code 3. Resolution (vertical): Current status code
4. Shutter speed: Current status code 4. Shutter speed: Current status code
11. Menu mode: Code of MENU off 11. Menu mode: Code of MENU off
12. Photron Remote Control Keypad code (30h) 12. Photron Remote Control Keypad code (30h)
This lets you exit the menu. This lets you exit the menu.
Note: For resolution and shutter speed, the code that is selected by [Resolution and Shutter Speed Note: For resolution and shutter speed, the code that is selected by [Resolution and Shutter Speed
Selection] is returned. Selection] is returned.
3-30 3-30
RS422 Protocol and Commands RS422 Protocol and Commands