Photron Fastcam SA2, Hardware Manual

Page: 25 / 101

13 FASTCAM SA2 / SA2 RV Hardware Manual
2.2.5. LCD Remote Controller (Optional)
The system can be operated while checking the monitor by connecting the optional LCD remote
controller to the "KEYPAD" connector on the rear of the camera body. The LCD remote controller is
also hot-pluggable, it can be plugged into and unplugged from the camera while the power is on.
Camera Body
Connector
Signal
Camera Body Connector
Model Name
(Manufacurer)
LCD Remote Controller
Connector
Model Name
(Manufacurer)
KEYPAD Keypad signal
PT02A-12-10S (023)
(Amphenol)
PT06A-12-10P (023)
(Amphenol)
 LCD remote controller only support [NTSC/PAL] video signal format.
When using the LCD remote controller, please setup output video signal format as [NTSC/PAL].
Color bars will be displayed if [HD SDI] is set as the output.

The LCD remote controller is optional. It is not included in the standard configuration.

For how to operate of the LCD Remote Controller, refer to "LCD Remote Controller User's Manual".