Photron Fastcam SA2, Hardware Manual

Page: 18 / 101

Chapter. 2 Setup
6
2.2. Part Names
The system is composed of components including the camera body, AC power supply, and the
"Photron FASTCAM Viewer" controls software (referred to below as PFV).
For each of the system components.
- Do not expose to shock outside of specifications.
- Do not use in an area with flammable gas or dust present.
- Do not place in an unstable location such as on a wobbly platform or an incline.
- Do not disassemble or modify.
- Do not expose to liquids such as water.
- Do not use in a manner where excessive force is applied.
- Only the accessories which fulfill a manufacturer's specification should be used for peculiar
accessories, such as an AC adaptor and a battery.
- Please use an external power supply with the suitable rating which was estimated by IEC/EN
61010-1 3rd Edition (complied with Cl. 6.3 and Cl. 9.4) or IEC/EN 60950-1 2nd Edition (complied
with Cl. 2.2 and Cl. 2.5), and separated from the main circuit by double insulation or reinforced
insulation.
2.2.1. Camera Body
The system has monochrome and color models, and for each of those models there are three types:
standard 8GB of memory and 16GB and 32GB large capacity types. You can select from these
models according to the desired application when purchasing.
The camera body contains IC memory for recording images and has been designed with the
capability to save high-speed images as uncompressed digital data. The camera body has HD
SDI/video output connectors that can playback recorded images on a video monitor, a Gigabit
Ethernet interface to connect to a PC to fully control the camera or download data, various I/O
(input/output) connectors for external synchronization/trigger signals, and an interface to record
IRIG/GPS time code/MCDL analog waveform.