Photron Fastcam SA2, Hardware Manual

Page: 95 / 101

83 FASTCAM SA2 / SA2 RV Hardware Manual
5.3. Cleaning the Filter
To prevent the buildup of heat, the system circulates air into the camera body with a fan. In order
to lower the risk that dirt and dust in the air will enter the camera, the air vent and exhaust vent
are fitted with filters.Clean the filters and the area around the filters regularly in order to keep the
system in top condition.
Do not remove any of the screws on the camera body except for the screws in the locations
shown in the diagram above.
The risk of problems can be lowered by cleaning the filters. However, problems caused by the
effects of heat from not cleaning the filters are exempted from warranty service, even if they
occur during the system’s warranty period.
The filters reduce the risk that dirt and dust will enter the camera body, but there is no guarantee
that it will eliminate problems caused by dirt and dust.
1. The cover of both ends on a
handle is opened, and two
screws which have fasten
down the handle are removed.
2. Remove the hex bolts that
hold on the duct from both
locations.
3. Clean the filters, duct, and the
area around the fans.