Photron Fastcam SA2, Hardware Manual

Page: 29 / 101

17 FASTCAM SA2 / SA2 RV Hardware Manual
2.2.8. Power Supply Connector
This connector is used to input the DC power supply. Connect the supplied AC adapter or the
optional IDX battery cable (battery sold separately).
A cable connector is available as an option. When using other power supplies, construct a cable
using the pin diagram below for reference.
DC 18-36V 100VA
Pin Diagram
PT02A-8-4P (023)
Connector Name Signal Name
Pin
No.
Camera body
connector model
name
(Manufacurer)
Cable connector
model name
(Manufacturer)
DC18-36V 100VA
+18V - +36V IN A
PT02A-8-4P (023)
(Amphenol)
PT06A-8-4S (424)
(Amphenol)
POWER GND B
POWER GND C
+18V - +36V IN D
When using the connector pins directly, refer to the chart above and ensure the wiring
is correct.
If the wiring is incorrect, not only is there the danger of the system malfunctioning, but
also of fire and electric shock.
Do not use a power supply which does not meet the system's specifications, or a
power supply you cannot guarantee the safety of.
By using a power supply outside of the system specifications, not only is there the
danger of the system malfunctioning, but also of fire and electric shock.
Warning
Warning