Photon Focus MV1-D2048-3D03 Series, User Manual, Page: 93 / 131

6.6 Trigger and Strobe Signals for GigE Cameras
6.6.3 Single-ended Outputs
ISO_OUT0 and ISO_OUT1 are single-ended isolated outputs.
ISO_OUT0 and ISO_OUT1 have different output circuits: ISO_OUT1 doesn’t have
a pullup resistor and can be used as additional Strobe out (by adding Pull up) or
as controllable switch. Maximal ratings that must not be exceeded: voltage: 30
V, current: 0.5 A, power: 0.5 W.
Fig. 6.8 shows the connection from the ISO_OUT0 output to a TTL logic device. PTC is a current
limiting device.
I
S O _ G N D
I S O _ P W R
P o w e r
M O S F E T
I S O _ O U T 0
P T C 4 k 7
C a m e r a
3
1 2 p o l . H i r o s e
C o n n e c t o r
I S O _ G N D
1 2
Y O U R _ G N D
I S O _ P W R Y O U R _ P W R
Y O U R _ G N D
C o n t r o l L o g i c
&
Y O U R _ P W R
+ + +
+
6
M a x . 3 0 V
M a x . 0 . 5 A
M a x . 0 . 5 W
Figure 6.8: Connection example to ISO_OUT0
Fig. 6.9 shows the connection from ISO_OUT1 to a TTL logic device. PTC is a current limiting
device.
I
S O _ G N D
P o w e r
M O S F E T
I S O _ O U T 1
P T C
C a m e r a
8
1 2 p o l . H i r o s e
C o n n e c t o r
I S O _ G N D
1 2
Y O U R _ G N D
Y O U R _ G N D
C o n t r o l L o g i c
&
Y O U R _ P W R
+
4 k 7
+
Y O U R _ P W R
M a x . 3 0 V
M a x . 0 . 5 A
M a x . 0 . 5 W
Figure 6.9: Connection from the ISO_OUT1 output to a TTL logic device
.
MAN052 12/2018 V3.2 93 of 131