Photon Focus MV1-D2048-3D03 Series, User Manual, Page: 11 / 131

2
Introduction
This manual describes the Photonfocus 3D camera series that have a Gigabit Ethernet (GigE)
interface and are based on the image sensors CMV2000 or CMV4000 sensors from CMOSIS.
A list of all cameras covered in this manual is shown in Table 4.2. The term MV1-D2048-3D03/04 is
used in this manual to denote all available cameras of this series.
2.1 Camera Naming convention
The naming convention of the MV1-D2048-3D03/04 camera series is summarized in Fig. 2.1.
M
V 1 - D 2 0 4 8 x 1 0 8 8 - 3 D 0 3 - 7 6 0 - G 2 - 8 - S 1 0
P r e f i x 1
P r e f i x 2
S e n s o r w i d t h
( o p t i o n a l )
S e n s o r h e i g h t
C a m e r a
s p e e d
I n t e r f a c e t y p e
I n t e r f a c e
r e s o l u t i o n
3 D d a t a f o r m a t
( o p t i o n a l )
l e n s m o u n t
Figure 2.1: Camera naming convention
Prefix1 All cameras have MV1 as Prefix1.
Prefix2 All cameras have D as Prefix2.
Sensor width All cameras covered in this manual use sensors with a width of 2048 pixels.
Sensor height
This indication is optional to avoid ambiguity. The cameras that use the 2 MPix
CMV2000 sensor have a height indicator of "1088". The cameras that use the 4 MPix
CMV4000 sensor don’t have a height indication.
3D coordinate data format Available 3D coordinate data formats are: "3D03": integer part 10
digits, fractional part 6 digits (see also Section 5.2.9); "3D04": integer part 12 digits,
fractional part 4 digits
Camera speed The camera speed is specified as the product of the camera data clock in MHz
and the number of parallel data channels (taps).
Interface type Available interface type options: "G2": Gigabit Ethernet with RS-422 interface
for a shaft (rotary) encoder; "H2": Gigabit Ethernet with HTL (High Threshold Logic)
interface (instead of RS-422) for a shaft (rotary) encoder
Interface resolution Maximal resolution (bit width) of the camera interface.
Lens mount
Cameras with no lens mount specifier have a standard (straight) C-Mount lens
mount. Cameras with the "S10" lens mount option have a 10 degree Scheimpflug
(C-Mount) lens mount.
MAN052 12/2018 V3.2 11 of 131