MV-D752-28 User’s Manual
REV: 1.0
Page 60/61
24
Service information
24.1
Contact for product enquiries and quotations
For product enquiries and quotations, please contact one of our distributors in your area.
A list of distributors can be found at:
www.photonfocus.com
24.2
Product information, documentation and software updates
www.photonfocus.com
24.3
Storage and Transport
During storage and transport, the camera should be protected against vibration, shock,
moisture and dust. The original packing protects the camera adequately from vibration
and shock during storage and transport. Please either retain this packing for possible
later use or dispose of it according to local regulations.
24.4
Preparing for use
Remove the camera from its packing and ensure that it is complete and undamaged. If
any damage has occurred during transport, please immediately contact the transport
company and your distributor.
The camera is delivered with a 3-pole power plug. Ensuring that the maximum operating
voltage is not exceeded, connect the camera to a suitable power supply. Install the
software supplied and test the camera with the PF-Remote program.
24.5
Mounting the lens
Remove the protective cap from the C-mount thread of the camera and screw in the
objective. When removing the protective cap or changing the objective, the camera
should always be held with the opening facing downwards to prevent dust from the
surroundings falling onto the CMOS sensor. If the objective is removed, the protective
cap should be refitted.
If the camera is operated in dusty surroundings, we recommend the use of a constant
stream of clean air at the front of the objective.