Photon Focus D-2048 CameraLink Series, User Manual

Page: 80 / 109

8 Graphical User Interface (GUI)
Trigger Delay [ms]: Programmable delay in milliseconds between the incoming trigger edge
and the start of the exposure.
Trigger signal active low: Define the trigger signal to be active high (default) or active low.
Burst Trigger
An external trigger event start a predefined number of acquisition. The period time between
the acquisitions can be configured.
Enable Burst Trigger: Delay in milliseconds from the input trigger edge to the rising edge of
the strobe output signal.
Number of Burst Triggers: Set the number of burst
Burst Trigger Period [ms]:
Set the time between the burst in milliseconds.
Burst Trigger Delay [ms]:
Set the delay of the burst trigger in milliseconds.
Strobe
The camera generates a strobe output signal that can be used to trigger a strobe. The delay,
pulse width and polarity can be defined by software. To turn off strobe output, set
StrobePulseWidth to 0.
Strobe Delay [ms]:
Delay in milliseconds from the input trigger edge to the rising edge of the
strobe output signal.
Strobe Pulse Width [ms]: The pulse width of the strobe trigger in milliseconds.
Strobe signal active low:
Define the strobe output to be active high (default) or active low.
78