13
14
2. SLICING YOUR
PRINT CW
1. Set up the machine profile in Creation Workshop
by clicking Configure Slicing Profile then Pick
Profile. Remember to press ‘Apply Changes’.
2. Set up the slicing profile in Creation Workshop
as shown below. Remember to press ‘Apply
Changes’.
3. If you have a powerful computer, for highest
quality prints, set anti-aliasing to 7. This will take
more processing power and not all computers
can process slicing when anti-aliasing is 4 or
above. If yours will not slice, keep anti-aliasing
at 3. Click Apply Changes.
4. Open the STL file that you wish to print. Adjust
scale, position, rotation etc using the controls
provided on the right hand tool bar in Creation
Workshop. Your printed item(s) should be
positioned centrally within the build area. Add
supports if required using the left hand tool bar
in Creation Workshop. You may need to expand
this tool bar by pressing the ‘+’ button.
5. Slice the STL file using the button. Use the ‘Slice
View’ tab to review the slice images. If you have
difficulty generating the slices correctly, contact
Photocentric for further support
2.1 SLICING YOUR PRINT
PHOTOCENTRIC STUDIO
1. Click on the ‘Slice’ button
2. Select the appropriate resin profile
3. You can rename the file or add a Print job
description in the relevant fields.
4. Once ready click ‘Ok, Start Slicing’
