background image

1.  Product model / product:

 

Product:   

3D Printer

 

Model / type: 

Liquid Crystal Opus

2.  Manufacturer: 

 

Photocentric Ltd

 

Address: Cambridge House, Oxney Road, Peterborough, PE1 5YW

3.  This declaration of conformity is issued under the sole responsibility of    

 

 

the manufacturer.

4.  Object of the declaration:

 

Product: Liquid Crystal Opus 3D Printer for manufacturing plastic parts by curing layers  

 

of photopolymer resin, using UV light controlled by an LCD screen.

 

Screen: 4K, 14”

 

Build volume: 

310 mm x 174 mm x 220 mm

 

Wavelength: 

410 nm

5.  The object of the declaration described above is in conformity with the relevant    

 

Union harmonisation legislation:

 

2014/35/EU 

Low Voltage Directive (LVD)

 

2014/30/EU 

Electromagnetic Compatibility (EMC) Directive

 

2011/65/EU 

Restriction of Hazardous Substances (RoHS 2) Directive

6.  References to the relevant harmonised standards used or references to the other  

 

BS EN ISO 12100:2010 Safety of machinery.  General principles for design.  

 

Risk assessment and risk reduction. 

 

BS EN IEC 61000-6-1:2019  Electromagnetic compatibility (EMC).  Generic standards.   

 

Immunity standard for residential, commercial and light-industrial environments.

 

BS EN 61000-6-3:2007+A1:2011 Electromagnetic compatibility (EMC).  

 

Generic standards.  Emission standard for residential, commercial and light-industrial    

 

environments.

 

BS EN 62368-1:2014+A11:2017 Audio/video, information and communication 

 

technology equipment. Safety requirements.

8.  Additional information:

 

Signed for and on behalf of: 

Photocentric Ltd

 

Place of issue:   

 

Peterborough

 

Date of issue: 

 

 

22nd June 2021

 

Name: 

 

 

 

Paul Holt

 

Position:     

Managing Director

 

Signature:

MANUFACTURER

PHOTOCENTRIC

MODEL

LC OPUS

BUILD SIZE

310 x 174 x 220mm

SOFTWARE

Photonic 3D V1.6.5

FILE STORAGE

25GB CAPACITY

RESOLUTION

3840 x 2160px

BACKLIGHT

410 UV

PIXEL PITCH

81 MICROMETER

2. GENERAL

INFORMATION

1. EU DECLARATION

OF CONFORMITY

 

1

2

Liquid  Crystal  (LC)  Opus  is  an  innovative  3D  printer,  designed  and  manufactured  in  the  UK  by  Photo-

centric  Ltd.  This  printer  uses  UV  light  to  cure  photo-polymer  resin  and  build  objects  layer  by  layer.  

Liquid Crystal Opus has been designed with several industry applications in mind. As 3D printing becomes 

more integral to optimized production, Liquid Crystal Opus is a powerful addition that will assist with boos-

ting productivity and will quickly become an established unit in any context. 

For further information, please visit 

our website:

 

- Photocentric Studio Software download

- Comprehensive instructional videos

 (LC Opus Resource Hub) 

- Fully updated user manuals 

(LC Opus Resource Hub)

- An online shop, for consumables, ancillary equipment, and spares

- For technical support queries, please contact the Service and Support team:

[email protected]

North and South American Customers -

 [email protected] 

Summary of Contents for Liquid Crystal Opus













Reviews: