Phonic POWERPOD 1060, User Manual

Page: 12 / 27

page 11
PHONIC CORPORATION POWERPOD User's Manual
30. EFX To Monitor Control)
This controls the level of the processed signal from
the built-in effect processor, that is sent to the Monitor
mixing bus.
31. EFX To Main Control
This controls the level of the processed signal from the
built-in effect processor, that is sent to the Main L/R
mixing bus.
32. AUX In Controls
The Powerpods 620 and 740
Deluxe feature a single AUX
in control (located beneath the
Main Equalizer) that adjusts the
fi nal level of the AUX in input
that is sent to the Main mixing
bus. The Powerpods 1060 and
1062 Deluxe, on the other hand,
feature 2 AUX in Controls. One
that adjusts the fi nal level that is
sent to the Monitor mixing bus
(the upper control), another that controls the fi nal
level that is sent to the Main L-R mixing bus (the lower
control).
33. Tape In
The Powerpod 620 Deluxe features a single Tape in
control (located below the equalizer) that adjusts the
fi nal level of the AUX in input that is sent to the Main
mixing bus. The Powerpods 740, 1060 and 1062
Deluxe, on the other hand, feature 2 Tape in controls.
One that adjusts the fi nal level that is sent to the
Monitor mixing bus (the upper control), another that
controls the fi nal level that is sent to the Main mixing
bus (the lower control).
34. Graphic Equalizers
These graphic equalizer allows you to adjust the
frequency response of a signal, with a maximum of
±
12
dB of signal boost or cut for each of the frequencies.
The Powepods 740, 1060 and 1062 Deluxe each
feature dual Graphic Equalizers, with models 1060
and 1062 feature two 10-band equalizers and the
740 feature two 7-band equalizers. The Powerpod
620 features a single stereo 7-band equalizer for
both the Main and Monitor signals. The uppermost
equalizer is for alteration of the Monitor signal (when
the EQ switch is in the appropriate position it becomes
the Main Left EQ - on the Powerpods 1060 and 1062
- and the Main 2 EQ - on the Powerpod 740), where
the lower equalizer is for the Main L-R signal (or Main
Right signal on Powerpods 1060 and 1062, Main 2 on
Powerpod 740).
35. EQ IN and Indicator
(Powerpods 740, 1060 and 1062 Deluxe only)
This button activates the graphic equalizer in which
it accompanies. The corresponding LED indicator
illuminates when the EQ is activated.