Phonic POWERPOD 1060, User Manual

Page: 13 / 27

page 12
POWERPOD User's Manual PHONIC CORPORATION
36. EQ Select Switch
(Powerpods 740, 1060 and 1062 Deluxe only)
This switch (featured on the Powerpods 740, 1060
and 1062 Deluxe only) enables you to select the way
you utilize the pair of Equalizers on these models.
On models 1060 and 1062, when the switch is in
the uppermost position it enables you to use the
top equalizer for the Monitor signal, and the bottom
equalizer for the Main L/R signal; the lower position
enables the equalizers to be used for the Main Left
and Right signals. On the 740 model, however, the
uppermost position is identical as the 1060 and 1062;
however the lower position allows the equalizers to be
used for the mixer’s Main 1 and 2 signals.
37. Rumble Filter
(Powerpods 740, 1060 and 1062 Deluxe only)
This button enables a high-pass fi lter on channels 1
through to 6 of the Mixer (channels 1 through 4 on the
Powerpod 740 Deluxe), effectively removing stage
rumble from your audio signal.
38. Phantom Power Switch and Indicator
When this switch is in the on position it activates
+48V of Phantom Power for all XLR jacks of all
channels on the Powerpod Mixers, allowing condenser
microphones to be used on these channels. The
corresponding LED will illuminate when the Master
Phantom Power is activated.
39. Amp Select Switches
This switches control the activity of the built-in power
amp, enabling the user to alternate between the
different signals which can be processed by the built-
in power amp and routed to the speaker outputs on
the rear of the device. This switch allows you to select
from: Main/Monitor – taking the monitor and main
signals and directing them to the appropriate speaker
outputs – Main L / Main R – using the Main L/R signal
to feed the speaker outputs – and Main Bridge – which
combines the Main Left and Right signal and feeds
them through the (L+R) Bridge output.
NB.
When using a mono bridge connection, do not connect a
speaker to any of the Main/Monitor A or B jacks, located on the
rear of the mixer. Use the "(L+R) Bridge" speaker jack only.
40. Monitor Level Control
This rotary control allows the user to adjust the fi nal
signal level sent to all Monitor outputs.
41. Main Level Control
This rotary control allows the user to adjust the
fi nal signal level sent to the Main L-R and Speaker
outputs.