Page
6
/
34
3.1 LCD display function menu
LCD menu main interface
1. Device name: The user can customize and modify the name through the control software or the lower computer.
2. Device IP: When the device is connected to the software via TCP/IP, the device and the computer must be in the same
IP domain, for example, the device IP is 169.254.xxx.xxx, and the computer IP should be 169.254.xxx.xxx.
3. Current gear: the preset currently applied by the device, Default is the default gear of the device.
4. Security lock: When this icon appears, the keys and knobs of the device are inoperable, press and hold [ENTER] for 5
seconds to unlock (can cancel the lock screen on the menu page).
5. Device firmware version: display the firmware version burned by the device.
3.2 Control buttons
BACK (Up key): Function and parameter selection.
NEXT (Down key): Function and parameter selection.
MENU (Menu key): Enter the main menu, use [BACK] and [NEXT] keys to select different
sub- menus.
ENTER (Enter key): Enter submenu or function to edit parameters; confirm selection;
change parameters.
BYPASS (Bypass key): Make the currently selected function inoperative.
EXIT (Exit key): Exit the current editing state or the current menu
3.3 Input section
EDIT/MUTE button (mute and edit button):
Long press [EDIT/MUTE key] EDIT/MUTE light turns on blue light, enters
the channel menu editing mode, lights up multiple channels at the same
time, enters the channel joint edit mode, click other input channels at this
time, there will be more than two channels lighted blue at the same time
Light, indicating joint adjustment of channel functions;
Short press [EDIT/MUTE key] The EDIT/MUTE indicator lights up in red, and the channel is muted; the EDIT/MUTE
indicator lights up in purple when the edit mode and mute are turned on at the same time;
Use [BACK] and [NEXT] Keys to switch functions and parameter editing.
1.Device name
3.Current gear
4.Security lock
5.Device firmware version
2.Device IP
