Page
11
/
34
The same type of equipment is required).
Central control.
Connection
Figure 6.1.3 "Connection" menu
As shown in Figure 6.1.3 "Connection" menu:
Port: set the connection mode, port number and baud rate, confirm the connection mode and then select the
corresponding port.
Connect : connect and download the device parameters.
Disconnect: disconnect the connected device.
Connect all: connect and download the device parameters of all devices in the device list.
Disconnect all: disconnect all connected devices in the device list.
Preset
Figure 6.1.4 "Device Preset" menu
As shown in Figure 6.1.4 device preset menu:
Save: select the saved gear, save all the parameters of the current automatic gear of the machine to the device preset
(2~ 30 Preset bit).
Call: call the device preset to the current automatic gear position.
Delete: delete the existing preset, the default file cannot be deleted, over written or saved.
Clear: delete all presets in the device.
Set as the boot file: select a certain preset, after setting it as the boot file, each time the device is powered on, it will
automatically call the save the parameters; the last set parameters need to be automatically saved, please set the
