Phonic i3600, User Manual

Page: 22 / 34

Page
22
/
34
7.7 Input and output with FIR
Double- click in the function button , and the following figure 7.6 FIR function page will pop up. Upper right
corner can zoom the interface.
Figure 7.6 FIR setting module
～
Setting area:

IMPORT: import FIR preset file to current channel.

EXPORT: export FIR preset file of current channel.

BYPASS: EQ is straight after bypass available, red for open, turn off manually when using FIR.

STORE: store FIR parameters in the device.

Taps: current Taps quantity

Ms: current delay

Name: current name of FIR preset file
～
Channels select: click and show current channel with FIR curve, support multiple channels.
～
Parameters select:

Design: design switch button for interface.

Magnitude: show magnitude curve.

Phase: show phase curve.

72dB: show content accuracy within 72dB amplitude.

144dB: show content accuracy within 144dB amplitude.
～
Curve area:

- 108
～
+36: amplitude accuracy, the value used for reference when the current display is an amplitude curve.

- 180°
～
+180°: phase accuracy, the value used for reference when the current display is a phase curve.

20Hz
～
20kHz: bands.
～
Design area:

: high pass, frequency band, low pass, flat.

Freq(HZ): start frequency setting, high pass on the left, low pass on the right.