TM
Instruction manual
“Copyright 2015, Phoenix Professional Audio GmbH, www.phoenix-pa.com“
Phoenix logo is registered at the German Patent- and Trademark Office (TM)
All brands are property of their respective owners.
25.
SETTINGS FOR CONFERENCE & PRIORITY SYSTEM
DESCRIPTION PROGRAMMER-5
IMPORTANT:
All DIP-switches (
PROGRAMMER
) are located in the interior of the amplifier. For the hardware configuration please open the
small cover which is located in the upper part of the amplifier´s cover.
IMPORTANT:
If the mixer shall be used as a „C
ONFERENCE SYSTEM
“ with priority levels, the input used for the „conference“,
PROGRAMMER-1
switch (X), has to be set to position
OFF
.
IMPORTANT:
If you want to use the priority functions of the mixer (c
onference system
), the
LAST MIC
. function
PROGRAMMER-4 swit
ch No. 4
has to be switched into the position
ON
.
The priority shown in the illustration below affects the microphone inputs 1 and 2, that means microphone 1 has priority over
the microphones No. 2 to 8. Microphone 2 has a priority function over the microphones No. 3 to 8.
In this configuration priority functions of the 1st chairman and the 2nd chairman against the microphones 3 to 8, or the 1st
chairman over the 2nd chairman and the microphone input 3 to 8 are effective.
ON
OFF
Programmer-4
Programmer-5
PRIORITY & CONFERENCE
TIME
AUTOMATIC JUSTIFICATION
ATTACK
AUTOMATIC JUSTIFICATION
SENSITIVITY
LINE/CD JUSTIFICATION
Summary of Contents for PowerVoice PV-DSP-1AD.9.2
Page 41: ......